# qpi-config

***Copyright © Quectel Wireless Solutions Co., Ltd. 2026. All rights reserved.***

---

**qpi-config** is a tool for configuring the features of the **Quectel Pi M2** smart controller board. It supports the following functions:

1. Query the temperature of system module units;

2. Query the system **CPU**, memory, and storage status;

3. Configure **Wi-Fi**.

# Query System Module Unit Temperature

Run the following command to query the module unit temperature:

```shell
sudo qpi-config dump temperature
```

```{image} images/image_Ej6mbjnOOozcnXx8OftccJhFn5g.webp
:width: 1024px
:height: 197px
```

# Query System CPU, Memory, and Storage Status

Run the following command to query the system CPU, memory, and storage status:

```shell
sudo qpi-config dump systemusage
```

```{image} images/image_WYpHbS95IoQ8HhxO5yzciC7Znec.webp
:width: 1033px
:height: 521px
```

# Configure Wi-Fi

Run the following command to scan for **Wi-Fi**:

```shell
sudo qpi-config wifi scan
```

```{image} images/image_NpwGbHrG6oAWHHxkdBucYHGInQf.webp
:width: 997px
:height: 235px
```

Run the following command to view existing **Wi-Fi** connections:

```shell
sudo qpi-config wifi show
```

Run the following command to add a **Wi-Fi** connection:

```shell
sudo qpi-config wifi connect <ssid> <passwd>
```

Run the following command to remove a **Wi-Fi** connection:

```shell
sudo qpi-config wifi remove <connection uuid>
```